24 Jobs für Hydraulic System Design Engineer
Stellenangebote Hydraulic System Design Engineer Jobs
Job am 24.01.2026 bei Jooble gefunden
XCMG Europe GmbH
• Krefeld
Your mission
Design and development of
hydraulic systems for mobile cranes Selection of suitable components (valves, pumps, cylinders, hoses) in coordination with suppliers Creation of hydraulic schematics and layouts using [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] modern CAD tools System analysis and optimization in terms of energy efficiency, responsiveness, and compactness Support during commissioning, testing, and troubleshooting in prototype and series phases Close cooperation with electrical, mechanical, procurement, and production departments Your profile Degree in Mechanical Engineering with a focus on fluid technology or a comparable qualification Several years of [. .. ]
Job am 14.01.2026 bei Jooble gefunden
FH Münster
System Engineer (Mechanical Systems)
• Steinfurt
[. .. ] 08 Full-time, permanent WHAT TO EXPECT In the context of this professorship, you will teach and conduct research into drive systems at the Department of Mechanical Engineering, [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] focusing on hydraulic, pneumatic and electric drive systems. In addition, you will deliver foundation courses in mechanical engineering. You will conduct most of your teaching in the bachelors and masters programmes at the sites of the Department of Mechanical Engineering in German, but also some in English, supporting FH Münsters internationalisation strategy in [. .. ] hydraulic, pneumatic and electric drive systems in mobile or stationary applications in an industrial environment. Every stage of the drives life cycle should be within your area of expertise, including design, integration into systems and machines, and recycling or disposal. You are able to present complex technical interconnections in an understandable way and ideally already have experience in teaching. WE OFFER YOU A permanent W2 professorship on civil servant conditions will enable you to make a valuable contribution to teaching, research [. .. ]
Job am 14.01.2026 bei Jooble gefunden
Polaris Raumflugzeuge GmbH
• Bremen
[. .. ] dedicated colleagues, we are working at two locations to make our vision reality. We are continuing to expand our team and are looking to fill the position [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] of Hydraulics/ Pneumatics System Engineer (m/f/d) . Your mission Design of the hydraulic and pneumatic system of a two stage winged hypersonic UAV Analysis and Simulation of hydraulic and pneumatic systems Communication with different disciplines to ensure compliance with all requirements Selection of components and support in procurement Support in testing and verification of the hydraulic and pneumatic system Your profile Successfully completed [. .. ]
Job am 14.01.2026 bei Jooble gefunden
FH Münster
Mechanic System Engineer (m/w/d)
• Steinfurt
[. .. ] 08 Full-time, permanent WHAT TO EXPECT In the context of this professorship, you will teach and conduct research into drive systems at the Department of Mechanical Engineering, [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] focusing on hydraulic, pneumatic and electric drive systems. In addition, you will deliver foundation courses in mechanical engineering. You will conduct most of your teaching in the bachelors and masters programmes at the sites of the Department of Mechanical Engineering in German, but also some in English, supporting FH Münsters internationalisation strategy in [. .. ] hydraulic, pneumatic and electric drive systems in mobile or stationary applications in an industrial environment. Every stage of the drives life cycle should be within your area of expertise, including design, integration into systems and machines, and recycling or disposal. You are able to present complex technical interconnections in an understandable way and ideally already have experience in teaching. WE OFFER YOU A permanent W2 professorship on civil servant conditions will enable you to make a valuable contribution to teaching, research [. .. ]
Job am 14.01.2026 bei Jooble gefunden
Blackwave GmbH
• Taufkirchen
Jobticket
YOUR RESPONSIBILITIES Your mission: As Team Lead for Equipment Tooling, youll be responsible for leading a growing team at the intersection of mechanical
design and automation. From forming tools to [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] machining fixtures and flowforming systems youll oversee the full lifecycle of our manufacturing equipment. You coordinate cross-functional interfaces, structure project plans, and make sure we build tools that power high-tech production at scale. Lead empower your team: You take on disciplinary and [. .. ] projects from early needs assessment to delivery aligning closely with manufacturing milestones and capacity planning. Bridge automation and mechanical design: You connect both worlds and ensure projects reflect the full system perspective. Create feedback loops from production: You build structured channels to gather feedback from manufacturing teams and drive continuous improvement for all tools in use. Ensure documentation maintainability: You take responsibility for complete technical documentation, including maintenance plans and user manuals (in collaboration with automation engineers) . Drive CE-readiness: [. .. ] machinery, automation, or a related field. Relevant experience : 45+ years of experience in tooling, equipment or production line development ideally as a team lead, project manager, or senior design engineer in special machinery or manufacturing plant engineering. Leadership ambition : Youve led a team or driven complex projects and are ready to take full ownership of a team and area. System-level understanding : You bring solid knowledge in electrical, pneumatic, and hydraulic systems ideally with experience in robotic systems. Drawing literacy : You can read, review, and guide technical drawings confidently. Hands-on challenger mindset : Youre passionate about building and improving and excited by high-tech processes like composite winding, pressing, laminating, or flowforming. WHAT WE OFFER Creative freedom responsibility: Autonomy, [. .. ]
Job am 14.01.2026 bei Jooble gefunden
Safran
Field Service Representative (m-f-d)
• Hamburg
[. .. ] systems. You will represent Safran Landing Systems in front of the customer and deliver a professional corporate image in line with Safran company standards. Role responsibilities: As [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] a Field Service Engineer, your main task will be to prepare, perform and record interventions on aircraft such as:-Inspection of damages or faults reported by the customer-Rework or replacement of parts and equipment-Embodiment of design changes and specific upgrades-Demonstrate the conformity of our equipment to the customer when applicable You will be part of a team of 10 Field Service Engineers working in a two shifts system and reporting to the local SLS Team Manager. You will ensure an effective communication within the team and with the production sites in France and England. As a side activity, you are responsible of one activity such as the management of the tools, spare parts, quarantine or consumables for the [. .. ] At least 2 to 3 years experience as aircraft technician or in a similar position Ability to read and understand drawings, manuals, and other technical documentation Good understanding of mechanical hydraulic products Customer oriented Strong interpersonal skills and ability to work well in a team environment. Ability to adapt to continuously changing work conditions while ensuring safe work practices Autonomous and reliable Good physical condition and manual dexterity Familiarity with IT tools and digital best practices Driving License Job Requirements At [. .. ]
Job gestern bei Jobleads gefunden
Team Lead-Equipment Tooling Engineering (m/f/d)
• Potzham, Bayern
Jobticket
YOUR RESPONSIBILITIES Your mission: As Team Lead for Equipment Tooling, youll be responsible for leading a growing team at the intersection of mechanical
design and automation. From forming tools [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] to machining fixtures and flowforming systems youll oversee the full lifecycle of our manufacturing equipment. You coordinate cross-functional interfaces, structure project plans, and make sure we build tools that power high-tech production at scale. Lead empower your team: You take on disciplinary and [. .. ] projects from early needs assessment to delivery aligning closely with manufacturing milestones and capacity planning. Bridge automation and mechanical design: You connect both worlds and ensure projects reflect the full system perspective. Create feedback loops from production: You build structured channels to gather feedback from manufacturing teams and drive continuous improvement for all tools in use. Ensure documentation maintainability: You take responsibility for complete technical documentation, including maintenance plans and user manuals (in collaboration with automation engineers) . Drive CE-readiness: [. .. ] machinery, automation, or a related field. Relevant experience : 45+ years of experience in tooling, equipment or production line development ideally as a team lead, project manager, or senior design engineer in special machinery or manufacturing plant engineering. Leadership ambition : Youve led a team or driven complex projects and are ready to take full ownership of a team and area. System-level understanding : You bring solid knowledge in electrical, pneumatic, and hydraulic systems ideally with experience in robotic systems. Drawing literacy : You can read, review, and guide technical drawings confidently. Hands-on challenger mindset : Youre passionate about building and improving and excited by high-tech processes like composite winding, pressing, laminating, or flowforming. WHAT WE OFFER Creative freedom responsibility: Autonomy, [. .. ]
Job vor 2 Tagen bei Jobleads gefunden
Team Lead-Equipment Tooling Engineering (m/f/d)
• Taufkirchen, Bayern
Jobticket
YOUR RESPONSIBILITIES Your mission: As Team Lead for Equipment Tooling, youll be responsible for leading a growing team at the intersection of mechanical
design and automation. From forming tools [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] to machining fixtures and flowforming systems youll oversee the full lifecycle of our manufacturing equipment. You coordinate cross-functional interfaces, structure project plans, and make sure we build tools that power high-tech production at scale. Lead empower your team: You take on disciplinary and [. .. ] projects from early needs assessment to delivery aligning closely with manufacturing milestones and capacity planning. Bridge automation and mechanical design: You connect both worlds and ensure projects reflect the full system perspective. Create feedback loops from production: You build structured channels to gather feedback from manufacturing teams and drive continuous improvement for all tools in use. Ensure documentation maintainability: You take responsibility for complete technical documentation, including maintenance plans and user manuals (in collaboration with automation engineers) . Drive CE-readiness: [. .. ] special machinery, automation, or a related field. Relevant experience: 45+ years of experience in tooling, equipment or production line development ideally as a team lead, project manager, or senior design engineer in special machinery or manufacturing plant engineering. Leadership ambition: Youve led a team or driven complex projects and are ready to take full ownership of a team and area. Systemlevel understanding: You bring solid knowledge in electrical, pneumatic, and hydraulic systems ideally with experience in robotic systems. Drawing literacy: You can read, review, and guide technical drawings confidently. Handson challenger mindset: Youre passionate about building and improving and excited by hightech processes like composite winding, pressing, laminating, or flowforming. WHAT WE OFFER Creative freedom responsibility: Autonomy, scope for decisionmaking and [. .. ]
Job vor 8 Tagen bei Jobleads gefunden
• Hamburg
[. .. ] for completion of the flight analysis Comply with the Flight Test Operations manuals for both the A220 and A320 Programs Flight Operations Manual (FOM) Ground Operations Method [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] (GOM) Safety Management System manual (SMS) Flight Acceptance Engineer Duties (A220 A320) The Flight Acceptance Engineer (FAE) has the responsibility to ensure the proper execution of the ground and flight tests by: 25Other Duties as Assigned 5 Additional program related duties as assigned During 1 year, the selected candidate will be assigned to Europe to be trained and to [. .. ] degree in Engineering/ Science/ Aeronautics, or equivalent professional experience preferred Experience 2 or more years of experience as a Flight Test Engineer 8+ years of experience in aircraft systems (MAP, Design Office, development functions) and various ATA chapter Qualified from a Flight Test School approved by EASA or equivalent experience that would allow for an EASA Cat 2 validation Airbus or Bombardier/ Airbus Canada minimum 5 years of experience preferred Prior Airbus experience in a Flight Operations environment, especially A220 or [. .. ] using electronic identification card to enter building floors and internal doors) : Daily able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Carrying: Daily able to carry documents, tools, drawings, electronic equipment up to 30lbs/ 14kgs. Lifting: Daily to 30lbs/ 14kgs. Pushing/ Pulling: Daily able to push and pull small office furniture and some equipment and tools. Sitting: Daily able to sit for long periods of time in meetings, working on [. .. ]
Job vor 9 Tagen bei Jobleads gefunden
Gas Turbine Exhaust System Engineer (R D) (f/m/d)
• Erlangen, Bayern
Sabbaticals
Overview As part of our team, you will be responsible for the exhaust gas
system of gas turbines, both in research and development as well as firsttime applications of [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] customer projects. You set the technical backbone that our global acting project execution teams are starting with an excellent design solution, thus ensuring successful project outcomes. How Youll Make An Impact Development and design of exhaust gas system for large gas turbines incl. diffuser, expansion joints, stack and diverter damper, incl. technical supplier qualification Drive development activities, conduct technical reviews, create and maintain detailed design documents for your systems Think [. .. ] experience in powerplant business Knowledge of material properties in a hot gas environment, incl. welding, manufacturing processes and related codes and international standards preferred Knowledge of heat transfer, noise absorption, hydraulic/ pneumatic control desirable Strong problemsolving and communication skills; able to handle complex engineering tasks and explain technical concepts clearly in an international environment Experience with CAd/FEM or similar tools preferred and familiarity with risk assessment methods, such as Failure Mode and Effects Analysis (FMEA) , and project execution experience [. .. ]
Job vor 11 Tagen bei Jobleads gefunden
• Hamburg
[. .. ] systems. You will represent Safran Landing Systems in front of the customer and deliver a professional corporate image in line with Safran company standards. Role responsibilities: As [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] a Field Service Engineer, your main task will be to prepare, perform and record interventions on aircraft such as: Inspection of damages or faults reported by the customer Rework or replacement of parts and equipment Embodiment of design changes and specific upgrades Demonstrate the conformity of our equipment to the customer when applicable You will be part of a team of 10 Field Service Engineers working in a two shifts system and reporting to the local SLS Team Manager. You will ensure effective communication within the team and with the production sites in France and England. As a side activity, you are responsible for one activity such as the management of tools, spare parts, quarantine or consumables for the whole Hamburg [. .. ] At least 2 to 3 years experience as aircraft technician or in a similar position Ability to read and understand drawings, manuals, and other technical documentation Good understanding of mechanical hydraulic products Customer oriented Strong interpersonal skills and ability to work well in a team environment. Ability to adapt to continuously changing work conditions while ensuring safe work practices Autonomous and reliable Good physical condition and manual dexterity Familiarity with IT tools and digital best practices Driving License Advantages 2-shifts [. .. ]
Job am 24.01.2026 bei Jobleads gefunden
Expert Stress Engineer-Systems Interiors (all genders)
• Weßling, Bayern
[. .. ] like-minded aviation enthusiasts who are determined to shape the future of aviation. This is what you can do: Provision of technical expertise in support of structural justifications [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] for systems, system installations and cabin installations for a CS25 commuter aircraft Definition of analysis philosophy, and associated methods, for the structural justification of systems, systems installations and cabin installations Review and approval of structural analysis and compliance documentation produced by systems and equipment suppliers Acting as Compliance Verification Engineer (CVE) for all analysis activities relating to systems, systems installations and cabin installations Mentoring and coaching of Systems Cabin Stress team as well as provision of technical direction to suppliers Definition, witnessing and interpretation of development and certification test Youll bring this with you: 15+ years of experience of static and F DT analysis of systems, systems installations (ECS, Electrical, Hydraulic, Fuel, Avionics, Flight Controls, Mechanical Systems) and interiors installations (Momuments, Galleys, Lavatories, Partitions etc. ) for CS25 aircraft Strong understanding of EASA (and FAA) certification requirements for CS25 aircraft associated AMC/ GM, and the aircraft certification process as well as other industry standards such as DO160G Previous experience as a [. .. ] offloaded to suppliers Proficiency in FEM tools (e. g. , Nastran, Patran, Hyper Works) and classical stress analysis Familiarity with Catia or similar CAD environment and 3DEXPERIENCE (3DX) for collaborative design, model synchronization, and PLM workflows Strong technical writing skills for stress reports, compliance documentation, and substantiation dossiers Understanding of load paths, load introduction, system/component vibration considerations, and integration with primary structure Familiarity with fatigue damage tolerance methods, durability concepts, and substantiation as per EASA requirements Capability to participate in [. .. ]
Job am 24.01.2026 bei Jobleads gefunden
• Bayern
[. .. ] like-minded aviation enthusiasts who are determined to shape the future of aviation. This is what you can do: Provision of technical expertise in support of structural justifications [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] for systems, system installations and cabin installations for a CS25 commuter aircraft Definition of analysis philosophy, and associated methods, for the structural justification of systems, systems installations and cabin installations Review and approval of structural analysis and compliance documentation produced by systems and equipment suppliers Acting as Compliance Verification Engineer (CVE) for all analysis activities relating to systems, systems installations and cabin installations Mentoring and coaching of Systems Cabin Stress team as well as provision of technical direction to suppliers Definition, witnessing and interpretation of development and certification test Youll bring this with you: 15+ years of experience of static and F D analysis of systems, systems installations (ECS, Electrical, Hydraulic, Fuel, Avionics, Flight Controls, Mechanical Systems) and interiors installations (Momuments, Galleys, Lavatories, Partitions etc. ) for CS25 aircraft Strong understanding of EASA (and FAA) certification requirements for CS25 aircraft associated AMC/ GM, and the aircraft certification process as well as other industry standards such as DO160G Previous experience as a [. .. ] offloaded to suppliers Proficiency in FEM tools (e. g. , Nastran, Patran, Hyper Works) and classical stress analysis Familiarity with Catia or similar CAD environment and 3DEXPERIENCE (3DX) for collaborative design, model synchronization, and PLM workflows Strong technical writing skills for stress reports, compliance documentation, and substantiation dossiers Understanding of load paths, load introduction, system/component vibration considerations, and integration with primary structure Familiarity with fatigue damage tolerance methods, durability concepts, and substantiation as per EASA requirements Capability to participate in [. .. ]
Job am 26.12.2025 bei Jobleads gefunden
Hydraulics/ Pneumatics System Engineer (m/f/d)
• Bremen
[. .. ] dedicated colleagues, we are working at two locations to make our vision reality. We are continuing to expand our team and are looking to fill the position [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] of Hydraulics/ Pneumatics System Engineer (m/f/d) . Your profile Successfully completed aerospace or mechanical engineering degree or similar (M. Sc. / M. Eng. ) Experience in designing hydraulic or pneumatic system for aerospace applications desirable Inter-disciplinary knowledge across all aerospace engineering fields desirable Experience with CAD software (preferably Autodesk Inventor or PTC CREO) Basic programming skills in python, C/ C++ Extensive and inter-disciplinary knowledge across all aerospace engineering fields Excellent analytical and interdisciplinary skills fluent English, [. .. ] now by sending your complete application portfolio, including CV, certificates and a cover letter outlining your relevant experience and why you are the ideal candidate for this role. Your mission Design of the hydraulic and pneumatic system of a two stage winged hypersonic UAV in the project HYTEV Analysis and Simulation of hydraulic and pneumatic systems of HYTEV Communication with different disciplines to ensure compliance with all requirements Selection of components and support in procurement Support in testing and verification of [. .. ]
Job am 24.11.2025 bei Jobleads gefunden
• Bremen
Join to apply for the Service
Engineer role at MARPRO Group 2 days ago Be among the first 25 applicants Join to apply for the Service Engineer role at [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] MARPRO Group Direct message the job poster from MARPRO Group Matching Maritime Professionals and Organizations-Maritime Talent Management-Recruitment-Diversity Inclusion-Future Ways of Leading-Do you have [. .. ] engineer, naval architect, shipbuilder, mechanical engineer, or training in related areas, At least 5 years of technical maritime experience, Service engineer experience especially with maneuvering systems is a plus, Electrical/ hydraulic competencies is a plus, Proficiency in Microsoft applications, incl. Excel, and Solid command of English (oral and written skills) . Personal Characteristics You are service-minded, have good interpersonal skills and can understand and offer what the customer expects and needs, You have solid organizational skills and work in a [. .. ] recruitment process. About LOEWE MARINE: LOEWE MARINE, founded in 2011, is already an established supplier, consultancy, and service company for shipping companies and shipyards worldwide, positioning itself as a significant system provider for the maritime industry with a future-oriented approach. The current portfolio of LOEWE MARINE includes the design, production, and installation of highly efficient full-spade rudders of all profiles and sizes for all types of vessels, the supply, repair, and maintenance of steering machines, the production of WEDs (Wake Equalizing Ducts) to increase propulsion efficiency, as well as consultancy services for shipping companies and suppliers in the [. .. ]
Job am 22.11.2025 bei Jobleads gefunden
Systems Integration Engineer
• Aachen, Nordrhein- Westfalen
Work-Life-Balance
Systems Integration
Engineer Johnson Electric Johnson Electric Aachen is a globally operating company of the Johnson Electric Group. In our Aachen development center, our team works in the development [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] of hydraulic systems and sintered metal applications for the automotive industry and industrial applications. Job Summary As a Systems Integration Engineer, you will focus on integrating components into complete systems, ensuring compatibility and seamless operation. Your role includes handson testing, troubleshooting, and validating system performance through bench and vehiclelevel integration. Youll work across mechanical, electrical, and software domains to deliver advanced hydraulic systems for automotive applications. This opportunity is initially available on a twoyear fixedterm contract with the potential to transition to a permanent arrangement. Responsibilities Develop mechatronic systems according to the VModel in compliance with automotive standards Understand system requirements with focus on motor, electronics and software subsystems, define subsystems and interfaces Coordinate with global expert teams Design and develop systems and system architectures based on customer requirements and for internal development activities Support in defining the testing strategy and scope and support testing and validation on system and integration level Work closely with customer and intercompany development teams Requirements Masters degree in Electrical Engineering, Automotive Engineering, Embedded [. .. ]
Job am 20.11.2025 bei Jobleads gefunden
• Heiligenhaus, Nordrhein- Westfalen
Absolventen, Einsteiger, Trainees
[. .. ] significantly expand our market share both nationally and internationally and are therefore looking to strengthen our team. We are looking for a trainee (m/f/d) to become a [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] mechatronics engineer for our company headquarters in Heiligenhaus, starting on 1 August 2025. Our team of mechatronics engineers assembles components and assemblies with mechanical and electronic connections. Their tasks also include assembling and installing electrical and mechanical components and connecting locking systems. Other activities include commissioning our locking systems and maintaining and [. .. ] range of activities in various areas: electrical engineering/ electronics, mechanics, and control and information technology Assembly of electrical and IT switchgear and control units Assembly of electrical, mechanical, pneumatic and hydraulic system components or assemblies Final assembly of machines, plants and systems Checking, maintaining, repairing and commissioning machines, plants and systems A comprehensive range of training courses What you bring to our team You have at least a secondary school leaving certificate You have a good knowledge of mathematics and physics You [. .. ] with mathematical and scientific fundamentals such as physics and mathematics. You will deal with engineering topics such as statics, materials science and technical thermodynamics. You will acquire knowledge about the design and analysis of technical systems with modules such as control engineering and signals systems. You will gain important insights into computer science, apply current software tools and learn how to program with C/ C++. In 6 out of 7 semesters, you will complete a practical project, during which we will [. .. ]
Job am 09.10.2025 bei Jobleads gefunden
Sr. Mechanical Design Engineer for HVAC Design (m/w/d) - Gigafactory Berlin-Brandenburg
• Grünheide (Mark) , Brandenburg Grünheide (Mark)
Sr. Mechanical
Design Engineer for HVAC Design (m/w/d) - Gigafactory Berlin-Brandenburg Join to apply for the Sr. Mechanical Design Engineer for HVAC Design (m/w/d) - Gigafactory Berlin-Brandenburg role at Tesla [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Role Overview We are recruiting a Senior Mechanical Design Engineer to join our Engineering team at Gigafactory Berlin-[. .. ] operational efficiency. Identify opportunities for innovation and OPEX reduction, supporting business cases with data analysis. Qualifications Masters degree in engineering or German Diplom Ingenieur. 7+ years of experience in HVAC system design, including ventilation, dust collection, VOC abatement, smoke exhaust, clean rooms, and related water systems. Fluent in English; German proficiency is a plus. Strong communication skills and ability to work in agile teams. Knowledge of engineering standards, especially DIN/ VDI/ AWSV. Experience with thermal calculation software like HAP and hydraulic calculations with Pipeflo or similar. Proficiency in Revit, Navisworks, and Auto CAD. Experience with project management tools like Azure and Aconex. Additional Details Seniority level: Mid-Senior level Employment type: Full-time Job function: Engineering and IT Industries: Automotive, Renewable Energy, Semiconductor, Utilities #J-18808-Ljbffr 65382085 [. .. ]
Job am 05.09.2025 bei Jobleads gefunden
• Osnabrück, Niedersachsen
Planters Machinery Senior
Design Engineer Responsibilities Designing and developing high speed precision planting meter seed delivery device for different crops and agronomy. Collecting information about high speed precision planter of [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] benchmarking enterprises and conducting benchmarking research. Establishing theoretical calculation methods and design standards of high speed precision planting meter seed delivery device. Establishing test methods of high speed precision planting meter seed delivery device. Participating in the layout reviews of planters row units. Participating in the design scheme reviews of the intelligent monitoring system, hydraulic system, transmission system of planter. Qualifications Minimum 5 years experience in the design and development of high-end precision planters, work experience with leading planter brands are preferred Experienced with pneumatic seed metering systems (air seeding technology) . Strong knowledge of agricultural machinery design principles, materials, and manufacturing processes. Willingness [. .. ]
Job vor 12 Tagen bei Neuvoo gefunden
Siemens Energy
Gas Turbine Exhaust System Engineer (R D) (f/m/d)
• Erlangen, Bavaria
Gas Turbine Exhaust
System Engineer (R D) (f/m/d) About the Role Location Germany Bayern Erlangen Remote vs. Office Hybrid (Remote/ Office) Company Siemens Energy Global Gmb H Co. KG Organization [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Gas Services Business Unit Central Full/ Part time Full-time Experience Level Experienced Professional A Snapshot of Your Day As part of our team, [. .. ] in research and development as well as first-time applications of customer projects. You set the technical backbone, that our global acting project execution teams are starting with an excellent design solution, thus ensuring successful project outcomes. You are involved in various technical topics supporting proposal teams, project execution, resolving site issues, maintaining specifications or driving design development. Either way, you will collaborate with a global cross-organization team with different technical and cultural backgrounds. How Youll Make an Impact Development [. .. ] experience in powerplant business Knowledge of material properties in a hot gas environment, incl. welding, manufacturing processes and related codes and international standards preferred Knowledge of heat transfer, noise absorption, hydraulic/ pneumatic control desirable Strong problem-solving and communication skills; able to handle complex engineering tasks and explain technical concepts clearly in an international environment Experience with CAd/FEM or similar tools preferred and familiarity with risk assessment methods, such as Failure Mode and Effects Analysis (FMEA) , and project execution [. .. ]
Job am 14.01.2026 bei Neuvoo gefunden
Barry- Wehmiller
Controls Engineer
• Blaubeuren, Baden- Württemberg
[. .. ] aufgestellten Unternehmensverbunds Barry-Wehmiller. Dieser ist in der verarbeitenden Industrie und in der ingenieurtechnischen Beratung tätig und erwirtschaftet pro Jahr einen Umsatz von mehreren Milliarden US-Dollar. Jobbeschreibung: The [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Controls Engineer will be responsible for designing and maintaining control system programs for our Equipment and Automation (E A) machinery, ensuring all developments are fully documented and in a standard format. This position will require frequent interaction with our customers and service technicians. The Controls Engineer will be involved in the servicing of existing machinery both remotely via telephone and onsite at our Customers facilities, including troubleshooting hydraulic and electrical control systems. ESSENTIAL FUNCTIONS RESPONSIBLITIES Design, develop and implement controls systems for our new equipment and upgrades to installed equipment. Troubleshoot and debug new and existing software to ensure optimal performance and improve efficiency or quality of operations. Use engineering skills and knowledge to assist customer with control systems problems for both remote and on-site [. .. ]
Job am 20.12.2025 bei Neuvoo gefunden
OHB
Werkstoffingenieurin für Produktentwicklung (m/w/d)
• Augsburg, Bavaria
[. .. ] part of the OHB Space and Technology Group. As a leading international aerospace company, we develop, manufacture and test essential components for launcher programs such as Ariane, [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] the Space Launch System (SLS) as well as commercial launcher systems, the Airbus fleet, spacecrafts, satellites and defense applications. Thanks to globally unique manufacturing technologies, we create high-performance products made of metal and fiber composites, such as large load-bearing structures and cryotanks, lightweight structures and fuel as well as pressure tanks that [. .. ] (French Guiana) . Space. Far away for most-soon very close for you. Become part of an industry of visionaries and pioneers and make a valuable contribution as a Materials Engineer for Product Development (m/f/d) to help the European launcher Ariane and other international launchers take off. Your Tasks Development and qualification of new metal/ composite/ hybrid materials and surface treatments for sophisticated aerospace and defence products Planning, definition and execution of complex mechanical material tests, in particular fracture [. .. ] Preparation of technical specifications, process documentation, for surface treatment, material cards and qualification reports Analysis and resolution of complex material and process deviations in development and production Close cooperation with design, engineering, quality assurance and external partners Active networking in the M P environment (industry, research, suppliers) and providing impetus for new technologies Contributing to a more efficient organisation through pragmatic and product-oriented solutions Your Qualifications Degree in materials science, materials engineering, mechanical engineering, aerospace engineering or a comparable field [. .. ] sandwich) and hybrid multi-material structures In-depth knowledge of mechanical materials testing, ideally with experience in fracture mechanics and testing under extreme temperature conditions Practical experience in working with hydraulic testing machines ( Instron, Zwick/ Roell, MTS) Experience with qualification and verification processes according to relevant standards ( ECSS, MIL-STD) Strong affinity for digitalised development processes, data management and workflow automation Pragmatic and efficient way of working Innovative thinking and ability to implement new technologies and processes Product-oriented [. .. ]
Job am 19.12.2025 bei Neuvoo gefunden
Hyundai Motorsport GmbH
Senior Design Engineer Cooling and Hydraulic Systems, Senior Design Engineer Cooling and Hydraulic Systems at Hyundai Motorsport GmbH softgarden
• Frankfurt, Hessen
Senior
Design Engineer Cooling and
Hydraulic Systems at Hyundai Motorsport Gmb H softgarden View job here Senior Design Engineer Cooling and Hydraulic Systems Full Time Frankfurt, Germany With Professional [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Experience 12/ 18/ 25 Main tasks Design, specification and development of vehicle systems (including for example and not limited to, cooling, steering and fuel systems) 3D detailed design [. .. ] environment working with high performance parts Have a strong background with a solid understanding of systems and mechanical engineering fundamentals Good knowledge of CAD (CATIA V5 preferable) Knowledge of PLM System (Windchill preferable) Ability to complete tasks with minimal guidance and to work under pressure to meet deadlines Fluent English is compulsory Our Offer Secure and long-term employment relationship Market and performance-related remuneration Training and career development Working in an international and dynamic environment 30 days vacation per calendar [. .. ]
Job am 19.12.2025 bei Neuvoo gefunden
GULP experts united
Development Engineer (m/f/d)
• Heidenheim, Baden- Wurttemberg
[. .. ] can be so easy: You can find attractive positions quickly and easily with us: We are looking for a client with immediate effect, a machine manufacturer in [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Heidenheim a Development Engineer (m/f/d) . Apply now and well get you one step closer to your dream job in no time. Apply directly online now Applications from severely disabled people are of course very welcome. Heres what we offer Attractive salary package including additional Christmas and vacation bonuses Long-term job [. .. ] Special conditions for the purchase of concert tickets, electronic devices, sports equipment and much more Your tasks Preparation, execution and evaluation of numerical flow simulations (CFD) in the field of hydraulic machines Focus on improving the quality of an existing, structured in-house meshing system for turbomachinery blades Identification of weak points in the meshing process and improvement in terms of functionality, stability and quality Application of numerical optimization and modification of the mesher code taking geometry information into account Comparison of the mesh quality of the in-house mesher with commercial alternatives Interdisciplinary collaboration with experts in simulation, measurement technology and hydraulic design Your profile Academic degree in mechanical engineering, aerospace engineering, computational engineering or a comparable field of study Relevant experience with the structured meshing of turbomachinery blades Sound knowledge in the application of flow solvers, ideally ANSYS CFX Confident handling of a programming language (preferably C++) and ideally experience with Auto [. .. ]
Häufig gestellte Fragen
Wieviel verdient man als Hydraulic System Design Engineer pro Jahr?
Als Hydraulic System Design Engineer verdient man zwischen EUR 60.000,- bis EUR 85.000,- im Jahr.
Wieviele offene Stellenangebote gibt es für Hydraulic System Design Engineer Jobs bei unserer Jobsuche?
Aktuell gibt es auf JobRobot 24 offene Stellenanzeigen für Hydraulic System Design Engineer Jobs.
Wieviele Unternehmen suchen nach Bewerbern für Hydraulic System Design Engineer Jobs?
Aktuell suchen 11 Unternehmen nach Bewerbern für Hydraulic System Design Engineer Jobs.
Welche Unternehmen suchen nach Bewerbern für Hydraulic System Design Engineer Stellenangebote?
Aktuell suchen zum Beispiel folgende Unternehmen nach Bewerbern für Hydraulic System Design Engineer Stellenangebote:
- XCMG Europe GmbH (1 Job)
- Polaris Raumflugzeuge GmbH (1 Job)
- Blackwave GmbH (1 Job)
- Safran (1 Job)
- Siemens Energy (1 Job)
In welchen Bundesländern werden die meisten Hydraulic System Design Engineer Jobs angeboten?
Die meisten Stellenanzeigen für Hydraulic System Design Engineer Jobs werden derzeit in Bayern (8 Jobs), Nordrhein-Westfalen (4 Jobs) und Bremen (2 Jobs) angeboten.
Zu welchem Berufsfeld gehören Hydraulic System Design Engineer Jobs?
Hydraulic System Design Engineer Jobs gehören zum Berufsfeld Wasserbau.
