36 Jobs für Silicon Wafer Production
Stellenangebote Silicon Wafer Production Jobs
Job vor 3 Tagen bei Mindmatch.ai gefunden
Silicon Austria Labs
• AT- 2 Villach
As part of the European Chips Act,
Silicon Austria Labs (SAL) is driving innovation in piezoelectric and semiconductor technologies through its Wide Band Gap Pilot Line. Join our interdisciplinary teams [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart of the Austrian Alps. Be part of something bigger. Be part [. .. ] piezoelectric materials (Al Sc N) and related devices Handson experience with structural, electrical, and functional characterization using relevant tools including AFM, XRD, SEM, ellipsometry, piezoelectric and ferroelectric testing Experience with 200mm wafer processing is an advantage Ability to run experiments, analyze data, and optimize material quality Strong documentation and reporting discipline Good collaboration record with internal teams and industrial partners High interest in applied research on advanced functional WBG materials Cleanroom experience, and willingness to work in cleanroom for at least 50 [. .. ] is conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop futureoriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and knowhow and conducts cooperative, applicationoriented research along the value chain. Cooperative projects are cofinanced by SAL and enable a fast and unbureaucratic project start. SAL is thus shaping the [. .. ]
Job vor 11 Tagen bei Mindmatch.ai gefunden
Silicon Austria Labs
Senior Research Engineer Technology development and process integration for MEMS-based applic. . .
• AT- 2 Villach
Your future responsibilities As part of the European Chips Act,
Silicon Austria Labs (SAL) is driving innovation in quantum and semiconductor technologies through its Quantum Pilot Lines. Join our interdisciplinary [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] teams at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart of the Austrian Alps. Be part of something bigger. Be part of Silicon [. .. ] fields such as optics, acoustic, inertial sensors from concept to prototype. Development and implementation of DOE to improve device performance. Microfabrication and prototyping in cleanroom facility by using 200 mm wafer level technology. Advanced testing of developed MEMS devices (electrical, mechanical, acoustic, ) . Scientific communication/ reporting of research results. Your profile Master + 5 years of relevant working experience/ Ph D + 2 years of relevant working experience in relevant fields (education in MEMS, microtechnology or similar fields) . Microfabrication experience [. .. ] is conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop futureoriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and knowhow and conducts cooperative, applicationoriented research along the value chain. Cooperative projects are cofinanced by SAL and enable a fast and unbureaucratic project start. SAL is thus shaping the [. .. ]
Job vor 11 Tagen bei Mindmatch.ai gefunden
Silicon Austria Labs (SAL)
• AT- 2 Villach
As part of the European Chips Act,
Silicon Austria Labs (SAL) is driving innovation in piezoelectric and semiconductor technologies through its Wide Band Gap Pilot Line. Join our interdisciplinary teams [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart of the Austrian Alps. Be part of something bigger. Be part [. .. ] materials (Al Sc N) and related devices Handson experience with structural, electrical, and functional characterization using relevant tools including AFM, XRD, SEM, ellipsometry, piezoelectric and ferroelectric testing Experience with 200 mm wafer processing is an advantage Ability to run experiments, analyze data, and optimize material quality Strong documentation and reporting discipline Good collaboration record with internal teams and industrial partners High interest in applied research on advanced functional WBG materials Cleanroom experience, and willingness to work in cleanroom for at least 50 [. .. ] is conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop futureoriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and knowhow and conducts cooperative, applicationoriented research along the value chain. Cooperative projects are cofinanced by SAL and enable a fast and unbureaucratic project start. SAL is thus shaping the [. .. ]
Job am 27.03.2026 bei Mindmatch.ai gefunden
Infineon Technologies
Principal Engineer SiC Epitaxy (f/m/div)
• AT- 2 Villach
Job Overview We are a team focused on advancing
silicon carbide
wafer technologies through meticulous process development and optimization in a cleanroom environment. Responsibilities Be responsible for the development and [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] further optimization of Si C epitaxy single process solutions in terms of reliability and yield to enable worldclass devices. Hand over qualified processes and control concepts to the production team. Work in close collaboration with the technology development team and production in Villach and Kulim. Qualifications Master degree/ Ph D in Physics, Applied Chemistry or Material Science. At least 5 years of relevant working experience in the field of Silicon Carbide epitaxy. Experience in optimizing tools and processes for high [. .. ]
Job am 26.03.2026 bei Mindmatch.ai gefunden
Silicon Austria Labs (SAL)
• AT- 2 Villach
Your future responsibilities
Silicon Austria Labs (SAL) is driving innovation in optical and semiconductor technologies through both European funding initiatives (Pilot Lines under the European Chips Act) and collaboration with [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] world-leading industries. Join our interdisciplinary teams at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart [. .. ] and metals (e. g. Cu) Hands-on experience with structural, electrical, and functional characterization using relevant tools including AFM, XRD, SEM, ellipsometry, piezoelectric and ferroelectric testing Experience with 200 mm wafer processing (advantage) Ability to run experiments, analyze data, and optimize material quality Autonomous, well-organized with strong documentation and reporting discipline High interest in applied research on advanced functional materials for MEMS applications Cleanroom experience Good collaboration record with internal teams and industrial partners Experience with successful funding applications is [. .. ] conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop future-oriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and know-how and conducts cooperative, application-oriented research along the value chain. Cooperative projects are co-financed by SAL and enable a fast and unbureaucratic project start. SAL is [. .. ]
Job am 21.03.2026 bei Mindmatch.ai gefunden
Photonics Austria
Scientist HiPIMS (all genders) / Job-ID: 250-0
• AT- 2 Prossowitsch
Scientist Hi PIMS (all genders) / / Job-ID: 250-0 VILLACH Full-time Your future responsibilities
Silicon Austria Labs (SAL) is driving innovation in optical and semiconductor technologies through both European [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] funding initiatives (Pilot Lines under the European Chips Act) and collaboration with world-leading industries. Join our interdisciplinary teams at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart [. .. ] Al N) and metals (e. g. Cu) Handson experience with structural, electrical, and functional characterization using relevant tools including AFM, XRD, SEM, ellipsometry, piezoelectric and ferroelectric testing Experience with 200 mm wafer processing (advantage) Ability to run experiments, analyze data, and optimize material quality Autonomous, wellorganized with strong documentation and reporting discipline High interest in applied research on advanced functional materials for MEMS applications Good collaboration record with internal teams and industrial partners Experience with successful funding applications is an advantage Experience [. .. ] is conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop futureoriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and knowhow and conducts cooperative, applicationoriented research along the value chain. Cooperative projects are cofinanced by SAL and enable a fast and unbureaucratic project start. SAL is thus shaping the [. .. ]
Job am 31.01.2026 bei Mindmatch.ai gefunden
Photonics Austria
• AT- 2 Villach
Scientist Ion-trap chips (all genders) / / Job-ID: 217-1 Your future responsibilities As part of the European Chips Act,
Silicon Austria Labs (SAL) is driving innovation in quantum and [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] semiconductor technologies through its Quantum Pilot Lines. We are looking for a motivated researcher working in a project on the development of ion-trap chips (ITCs) at SAL. You will become part of a highly motivated, international team committed to realizing [. .. ] subject to strong performance and future funding opportunities. Your future responsibilities include: Support ITC development and fabrication across different research units and cleanroom facilities in cleanroom facilities utilizing 200 mm wafer-level technology. Support testing of developed ITC devices. Participate in the design, fabrication and technological advancement of ion trap chips. Communicate and report research findings to both scientific and non-scientific audiences. Communicate and align with industry and academic partners. Contribution to project management. Occasionally R D project acquisition. Your [. .. ] conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop future-oriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and know-how and conducts cooperative, application-oriented research along the value chain. Cooperative projects are co-financed by SAL and enable a fast and unbureaucratic project start. SAL is [. .. ]
Job am 31.01.2026 bei Mindmatch.ai gefunden
Silicon Austria Labs (SAL)
Scientist Ion-trap chips (all genders) / / Job-ID: 217-1
• AT- 2 Villach
Overview Scientist Ion-trap chips (all genders) / / Job-ID: 217-1 at
Silicon Austria Labs (SAL) . Your Future Responsibilities As part of the European Chips Act, SAL is driving [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] innovation in quantum and semiconductor technologies through its Quantum Pilot Lines. We are looking for a motivated researcher working on the development of ion-trap chips (ITCs) at SAL. You will join a [. .. ] 3 years, with potential for continuation in a permanent role depending on performance and funding. Support ITC development and fabrication across different research units and cleanroom facilities utilizing 200 mm wafer-level technology. Support testing of developed ITC devices. Participate in the design, fabrication and advancement of ion trap chips. Communicate and report research findings to scientific and non-scientific audiences. Coordinate with industry and academic partners. Contribute to project management. Occasionally R D project acquisition. Your profile Ph D (MSc) in [. .. ] Villach, Linz) , SAL conducts research along the ESBS value chain in sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop future-oriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together industry, science and research and conducts cooperative, application-oriented research with co-financing from SAL to enable fast project starts. SAL aims to shape Austria and Europes high-tech future, and values employees as a top priority. Seniority level Entry level [. .. ]
Job am 02.01.2026 bei Mindmatch.ai gefunden
Silicon Austria Labs (SAL)
• AT- 2 Villach
[. .. ] (all genders) / / Job-ID: 176-1 Join to apply for the Senior Research Engineer/ Scientist-Ion-trap chips (all genders) / / Job-ID: 176-1 role at
Silicon Austria [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Labs (SAL) Senior Research Engineer/ Scientist-Ion-trap chips (all genders) / / Job-ID: 176-1 Join to apply for the Senior Research Engineer/ Scientist-Ion-trap chips (all genders) / / Job-ID: 176-1 role at Silicon Austria Labs (SAL) Your Future Responsibilities We are looking [. .. ] international collaborative network. Coordinate ITC development and fabrication across different research units and cleanroom facilities. Execute small-scale fabrication and prototype for ITC devices in cleanroom facilities utilizing 200 mm wafer-level technology. Coordinate testing of developed ITC devices. Co-develop the design, fabrication and technological advancement of ion trap chips. Perform quality control and documentation for the statical process control. Communicate and report research findings to both scientific and non-scientific audiences. Communicate and align with industry and academic partners [. .. ] conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop future-oriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and know-how and conducts cooperative, application-oriented research along the value chain. Cooperative projects are co-financed by SAL and enable a fast and unbureaucratic project start. SAL is [. .. ]
Job vor 5 Tagen bei Jobleads gefunden
Vice President of Operations
• Zürich Zuerich
Führungs-/ Leitungspositionen
[. .. ] endtoend operations function for a fastgrowing fabless semiconductor company. This executive will take ownership of manufacturing, supply chain, quality, and delivery transforming early prototypes and customer pilots [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] into reliable, highvolume production. This is a handson leadership role requiring deep technical expertise, strong execution instincts, and the ability to operate effectively in an environment with limited resources, evolving processes, and aggressive timelines. Key responsibilities Build Scale Operations Establish and scale fabless operations from early silicon through volume production Design and implement operational processes, systems, and KPIs suitable for rapid growth Lead NPI, qualification, ramp, and sustaining production across multiple products and customers Balance speed, cost, and quality in a resourceconstrained environment Supply Chain Manufacturing Own all external manufacturing: foundries, OSATs, test partners, and logistics providers [. .. ] semiconductor operations, manufacturing, or supply chain Strong background in fabless semiconductor companies, preferably at startup or scaleup stage Proven experience taking products from tapeout to volume production Deep knowledge of wafer fabrication, packaging, test, and yield optimization Track record of building processes and teams from the ground up Ability to operate effectively with ambiguity, incomplete data, and tight timelines Preferred Experience scaling a startup through rapid growth or acquisition Exposure to advanced nodes and/or complex packaging Background in markets such [. .. ]
Neu Job vor 5 Std. bei Jobleads gefunden
• Hamburg
(Sr. ) Process Integration Engineer (m/f/d) Location Hamburg What you will do Develop and qualify new
wafer fab process modules on
silicon epitaxy equipment (e. g. , Centura, [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] ASM) for mass production Lead and execute major process development and integration activities while building deep product and process expertise Act as a key interface between Business Groups and production in a cross-functional environment Ensure alignment of module development topics between projects and the fab Manage potential conflicts constructively through objective, solutionoriented communication, [. .. ]
Job vor 3 Tagen bei Jobleads gefunden
Senior Research Engineer Nitride Thin-Film Materials (Wide Band Gap) / Job-ID:231-0
• Villach, Kärnten
As part of the European Chips Act,
Silicon Austria Labs (SAL) is driving innovation in piezoelectric and semiconductor technologies through its Wide Band Gap Pilot Line. Join our interdisciplinary [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] teams at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart of the Austrian Alps. Be part of something bigger. Be part [. .. ] piezoelectric materials (Al Sc N) and related devices Handson experience with structural, electrical, and functional characterization using relevant tools including AFM, XRD, SEM, ellipsometry, piezoelectric and ferroelectric testing Experience with 200mm wafer processing is an advantage Ability to run experiments, analyze data, and optimize material quality Strong documentation and reporting discipline Good collaboration record with internal teams and industrial partners High interest in applied research on advanced functional WBG materials Cleanroom experience, and willingness to work in cleanroom for at least 50 [. .. ] is conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop futureoriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and knowhow and conducts cooperative, applicationoriented research along the value chain. Cooperative projects are cofinanced by SAL and enable a fast and unbureaucratic project start. SAL is thus shaping the [. .. ]
Job vor 4 Tagen bei Jobleads gefunden
(Sr. ) Process Integration Engineer (m/f/d)
• Hamburg
Work-Life-Balance
[. .. ] is loaded # # (Sr. ) Process Integration Engineer (m/f/d) locations: Hamburgtime type: Part timeposted on: job requisition id: R-20014226What you will do Develop and qualify new [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] wafer fab process modules on silicon epitaxy equipment (e. g. , Centura, ASM) for mass production Lead and execute major process development and integration activities while building deep product and process expertise Act as a key interface between Business Groups and production in a cross-functional environment Ensure alignment of module development topics between projects and the fab Manage potential conflicts constructively through objective, solutionoriented communication, [. .. ]
Job vor 11 Tagen bei Jobleads gefunden
Senior RFIC Test Engineer-m/w/d
• München, Bayern
We are Mobileyes
Production Test team-responsible for the definition, development, and deployment of production test operations for the worlds most advanced So Cs for ADAS and selfdriving vehicles, as [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] well as mm Wave RF chips for automotive imaging radar systems. This is your opportunity to join a team during its initial forming stage and leave your mark as Mobileye assumes full ownership for its silicon production operations to enable high volume manufacturing for cuttingedge automotive products. What will your job look like? Partner with the design teams from early stages of the design process to review DFX architecture and define test requirements. Define specifications for key RF performance parameters (e. g. , SNR, Noise Figure, [. .. ] quality that meets automotive standards. Support Quality Reliability team to enable effective and timely qual plan execution. Lead test deployment activities with tierone Foundry and OSAT vendors to enable largescale Wafer Sort and Final Test operations. All you need is: BSc or MSc degree in Electrical Engineering. 10+ years of experience as IC Product/ Test engineer. Handson experience in bringup productization of complex IC products. Handson experience implementing and optimizing RF test solutions on ATE platforms. Prior experience with Teradyne Ultra [. .. ]
Job vor 11 Tagen bei Jobleads gefunden
• Villach, Kärnten
Your future responsibilities As part of the European Chips Act,
Silicon Austria Labs (SAL) is driving innovation in quantum and semiconductor technologies through its Quantum Pilot Lines. Join our [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] interdisciplinary teams at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart of the Austrian Alps. Be part of something bigger. Be part of Silicon [. .. ] fields such as optics, acoustic, inertial sensors from concept to prototype. Development and implementation of DOE to improve device performance. Microfabrication and prototyping in cleanroom facility by using 200 mm wafer level technology. Advanced testing of developed MEMS devices (electrical, mechanical, acoustic, ) . Scientific communication/ reporting of research results. Your profile Master + 5 years of relevant working experience/ Ph D + 2 years of relevant working experience in relevant fields (education in MEMS, microtechnology or similar fields) . Microfabrication experience [. .. ] is conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop futureoriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and knowhow and conducts cooperative, applicationoriented research along the value chain. Cooperative projects are cofinanced by SAL and enable a fast and unbureaucratic project start. SAL is thus shaping the [. .. ]
Job am 31.03.2026 bei Jobleads gefunden
DFT Engineer, Automotive Robotics
• München, Bayern
[. .. ] Automotive Robotics team, you will help design and deliver the core hardware modules inside our next generation chiplet based So Cs for automotive products. You will be [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] the bridge between silicon design, DFT, OSAT partners, and customers to ensure our multi die Si P platforms meet aggressive performance, quality, and safety targets. This role is remote, based in Munich, Germany. We welcome candidates at various experience levels for this role. During the interview process, candidates will be assessed for the appropriate level, and offers will align with that level, which may differ from the one in this posting. Who You Are Experienced with bringing ASICs from design phase through production ramp, managing wafer yield, and analyzing field failure rates. Able to translate system and safety requirements into concrete constraints on package architecture, DFT insertion, and ATE or SLT test content. Confident working directly with foundry, OSAT, and ATE vendors to debug issues. Comfortable working in a cross functional role that extends beyond DFT, [. .. ]
Job am 27.03.2026 bei Jobleads gefunden
• Villach, Kärnten
Job Overview We are a team focused on advancing
silicon carbide
wafer technologies through meticulous process development and optimization in a cleanroom environment. Responsibilities Be responsible for the [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] development and further optimization of Si C epitaxy single process solutions in terms of reliability and yield to enable worldclass devices. Hand over qualified processes and control concepts to the production team. Work in close collaboration with the technology development team and production in Villach and Kulim. Qualifications Master degree/ Ph D in Physics, Applied Chemistry or Material Science. At least 5 years of relevant working experience in the field of Silicon Carbide epitaxy. Experience in optimizing tools and processes for high [. .. ]
Job am 26.03.2026 bei Jobleads gefunden
Scientist HiPIMS (all genders) / / Job-ID: 250-0
• Villach, Kärnten
Your future responsibilities
Silicon Austria Labs (SAL) is driving innovation in optical and semiconductor technologies through both European funding initiatives (Pilot Lines under the European Chips Act) and collaboration [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] with world-leading industries. Join our interdisciplinary teams at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart [. .. ] and metals (e. g. Cu) Hands-on experience with structural, electrical, and functional characterization using relevant tools including AFM, XRD, SEM, ellipsometry, piezoelectric and ferroelectric testing Experience with 200 mm wafer processing (advantage) Ability to run experiments, analyze data, and optimize material quality Autonomous, well-organized with strong documentation and reporting discipline High interest in applied research on advanced functional materials for MEMS applications Cleanroom experience Good collaboration record with internal teams and industrial partners Experience with successful funding applications is [. .. ] conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop future-oriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and know-how and conducts cooperative, application-oriented research along the value chain. Cooperative projects are co-financed by SAL and enable a fast and unbureaucratic project start. SAL is [. .. ]
Job am 20.03.2026 bei Jobleads gefunden
• Prossowitsch, Kärnten
Scientist Hi PIMS (all genders) / / Job-ID: 250-0 VILLACH Full-time Your future responsibilities
Silicon Austria Labs (SAL) is driving innovation in optical and semiconductor technologies through both European [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] funding initiatives (Pilot Lines under the European Chips Act) and collaboration with world-leading industries. Join our interdisciplinary teams at the interface of design and fabrication and enjoy Villachs exceptional quality of life in the heart [. .. ] Al N) and metals (e. g. Cu) Handson experience with structural, electrical, and functional characterization using relevant tools including AFM, XRD, SEM, ellipsometry, piezoelectric and ferroelectric testing Experience with 200 mm wafer processing (advantage) Ability to run experiments, analyze data, and optimize material quality Autonomous, wellorganized with strong documentation and reporting discipline High interest in applied research on advanced functional materials for MEMS applications Good collaboration record with internal teams and industrial partners Experience with successful funding applications is an advantage Experience [. .. ] is conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop futureoriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and knowhow and conducts cooperative, applicationoriented research along the value chain. Cooperative projects are cofinanced by SAL and enable a fast and unbureaucratic project start. SAL is thus shaping the [. .. ]
Job am 05.03.2026 bei Jobleads gefunden
Silicon Photonics Specialist-Field-Service Engineer (m/f/d)
• Thiendorf, Sachsen
Homeoffice möglich
Work-Life-Balance
[. .. ] probes, metrology systems, as well as quantum cryogenic measurement systems. Globally, Form Factor Inc. has locations in all markets relevant to the semiconductor industry. In Germany, we [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] develop and manufacture wafer probers for a wide range of applications. Our products and solutions contribute significantly to the development and production of new technologies. From AI to 5G, from autonomous driving to quantum computing, almost every breakthrough innovation today has its form factor. That Looks Good. Your Future At Form Factor Hello future As part of our large Form Factor family, you will play an active role in shaping current and [. .. ] operating in an incredibly exciting and crisisproof industry of the future. Not enough? We would be happy to introduce you to many other benefits in a personal conversation. Job Description Silicon Photonics Specialist Field-Service Engineer (m/f/d) who performs installations, troubleshooting and repairs at our customers sites. In Our Company, Your Core Responsibilities Include Supporting our Silicon Photonics Wafer Probe System product Installation commissioning of probers and accessories, including final acceptance according to test and acceptance regulations Independent execution [. .. ]
Job am 28.02.2026 bei Jobleads gefunden
Vice President of Operations
• Zürich
Führungs-/ Leitungspositionen
[. .. ] function for a fast-growing fabless semiconductor company. This executive will take ownership of manufacturing, supply chain, quality, and delivery transforming early prototypes and customer pilots into reliable, [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] high-volume production. This is a hands-on leadership role requiring deep technical expertise, strong execution instincts, and the ability to operate effectively in an environment with limited resources, evolving processes, and aggressive timelines. Key Responsibilities Build Scale Operations Establish and scale fabless operations from early silicon through volume production Design and implement operational processes, systems, and KPIs suitable for rapid growth Lead NPI, qualification, ramp, and sustaining production across multiple products and customers Balance speed, cost, and quality in a resource-constrained environment Supply Chain Manufacturing Own all external manufacturing: foundries, OSATs, test partners, and logistics [. .. ] operations, manufacturing, or supply chain Strong background in fabless semiconductor companies, preferably at startup or scale-up stage Proven experience taking products from tapeout to volume production Deep knowledge of wafer fabrication, packaging, test, and yield optimization Track record of building processes and teams from the ground up Ability to operate effectively with ambiguity, incomplete data, and tight timelines Preferred Experience scaling a startup through rapid growth or acquisition Exposure to advanced nodes and/or complex packaging Background in markets such [. .. ]
Job am 28.02.2026 bei Jobleads gefunden
Senior Mechanical Design Engineer-High Temperature Vacuum Systems (f/m/d)
• Freiburg im Breisgau, Baden- Württemberg
[. .. ] Temperature Vacuum Systems (f/m/d) . In this role you will have the opportunity to contribute to the commercialization of groundbreaking technology. At Nex Wafe, we are redefining [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] how silicon wafers are manufactured. Our epitaxial wafer technology dramatically reduces process steps, energy consumption, and CO footprintsetting a new benchmark for nextgeneration photovoltaics. As a Senior Mechanical Design Engineer-High Temperature Vacuum Systems (f/m/d) you will drive mechanical design, equipment development, and supplier collaboration for our epitaxial wafer manufacturing tools and related hightemperature process equipment. [. .. ] skills: Optimise your career prospects with the English and German courses offered. About Us At Nex Wafe, were striving to set a new standard for the future of photovoltaic wafer production. The need for efficient, affordable and cleanly produced solar technology has never been greater were rising to meet that challenge. #J-18808-Ljbffr 82196194 [. .. ]
Job am 22.02.2026 bei Jobleads gefunden
Principal Product Engineer
• München, Bayern
[. .. ] manufacturing, and reliability standards. You will also support customer evaluations by addressing inquiries related to Microchips capabilities, manufacturing processes, quality systems, and product offerings. Job Responsibilities Guide [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] and advise new silicon product development teams to ensure products meet automotive market requirements for design-for-test, reliability, outlier detection, and AEC-Q100 qualification. Take ownership of investigating and preparing responses to customer non-standard questions and requests (NSCARs) , gathering and presenting information from various internal sources. Support and ensure compliance with automotive industry standards, including IATF 16949, APQP, PPAP, and change management processes. Collaborate with and lead informal cross-functional teams to address technical and business challenges. Review and approve Production Part Approval Process (PPAP) documentation. Communicate effectively with customers regarding proposed product changes and technical details. Build and maintain strong, trusted relationships with key automotive customers and internal stakeholders. Requirements/ Qualifications Bachelors degree in engineering (minimum 4 years) and over 10 years of experience in the semiconductor industry. Strong customer [. .. ] skills are a plus but not required. Familiarity with IATF 16949, ISO 26262, and ISO 21434 standards. Understanding of transistor operation and digital semiconductor device functionality. Knowledge of semiconductor design, wafer manufacturing, packaging, and testing processes. Experience with AEC-Q100 reliability test requirements and methods for automotive applications. Proficient in PPAP requirements and able to explain their contents. Skilled in persuasive speaking and negotiation. Travel Time 0-25 To all recruitment agencies Microchip Technology Inc. does not accept unsolicited agency resumes. [. .. ]
Job am 19.02.2026 bei Jobleads gefunden
Principal Product Engineer
• Heilbronn, Baden- Württemberg
[. .. ] manufacturing, and reliability standards. You will also support customer evaluations by addressing inquiries related to Microchips capabilities, manufacturing processes, quality systems, and product offerings. Job Responsibilities Guide [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] and advise new silicon product development teams to ensure products meet automotive market requirements for design-for-test, reliability, outlier detection, and AEC-Q100 qualification. Take ownership of investigating and preparing responses to customer non-standard questions and requests (NSCARs) , gathering and presenting information from various internal sources. Support and ensure compliance with automotive industry standards, including IATF 16949, APQP, PPAP, and change management processes. Collaborate with and lead informal cross-functional teams to address technical and business challenges. Review and approve Production Part Approval Process (PPAP) documentation. Communicate effectively with customers regarding proposed product changes and technical details. Build and maintain strong, trusted relationships with key automotive customers and internal stakeholders. Requirements/ Qualifications Bachelors degree in engineering (minimum 4 years) and over 10 years of experience in the semiconductor industry. Strong customer [. .. ] skills are a plus but not required. Familiarity with IATF 16949, ISO 26262, and ISO 21434 standards. Understanding of transistor operation and digital semiconductor device functionality. Knowledge of semiconductor design, wafer manufacturing, packaging, and testing processes. Experience with AEC-Q100 reliability test requirements and methods for automotive applications. Proficient in PPAP requirements and able to explain their contents. Skilled in persuasive speaking and negotiation. Travel Time 0-25 To all recruitment agencies Microchip Technology Inc. does not accept unsolicited agency resumes. [. .. ]
Job am 16.02.2026 bei Jobleads gefunden
Principal Product Engineer
• München, Bayern
[. .. ] manufacturing, and reliability standards. You will also support customer evaluations by addressing inquiries related to Microchips capabilities, manufacturing processes, quality systems, and product offerings. Job Responsibilities Guide [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] and advise new silicon product development teams to ensure products meet automotive market requirements for design-for-test, reliability, outlier detection, and AEC-Q100 qualification. Take ownership of investigating and preparing responses to customer non-standard questions and requests (NSCARs) , gathering and presenting information from various internal sources. Support and ensure compliance with automotive industry standards, including IATF 16949, APQP, PPAP, and change management processes. Collaborate with and lead informal cross-functional teams to address technical and business challenges. Review and approve Production Part Approval Process (PPAP) documentation. Communicate effectively with customers regarding proposed product changes and technical details. Build and maintain strong, trusted relationships with key automotive customers and internal stakeholders. Requirements/ Qualifications: Bachelors degree in engineering (minimum 4 years) and over 10 years of experience in the semiconductor industry. Strong customer [. .. ] skills are a plus but not required. Familiarity with IATF 16949, ISO 26262, and ISO 21434 standards. Understanding of transistor operation and digital semiconductor device functionality. Knowledge of semiconductor design, wafer manufacturing, packaging, and testing processes. Experience with AEC-Q100 reliability test requirements and methods for automotive applications. Proficient in PPAP requirements and able to explain their contents. Skilled in persuasive speaking and negotiation. Travel Time:0-25To all recruitment agencies: Microchip Technology Inc. does not accept unsolicited agency resumes. Please do [. .. ]
1 von 2Weiter » Weitere Suchergebnisse laden »
Häufig gestellte Fragen
Wieviele offene Stellenangebote gibt es für Silicon Wafer Production Jobs bei unserer Jobsuche?
Aktuell gibt es auf JobRobot 36 offene Stellenanzeigen für Silicon Wafer Production Jobs.
Wieviele Unternehmen suchen nach Bewerbern für Silicon Wafer Production Jobs?
Aktuell suchen 10 Unternehmen nach Bewerbern für Silicon Wafer Production Jobs.
Welche Unternehmen suchen nach Bewerbern für Silicon Wafer Production Stellenangebote?
Aktuell suchen zum Beispiel folgende Unternehmen nach Bewerbern für Silicon Wafer Production Stellenangebote:
- Silicon Austria Labs (2 Jobs)
- Photonics Austria (2 Jobs)
- Nexperia (2 Jobs)
- Fraunhofer- Gesellschaft (2 Jobs)
- Infineon Technologies (1 Job)
In welchen Bundesländern werden die meisten Silicon Wafer Production Jobs angeboten?
Die meisten Stellenanzeigen für Silicon Wafer Production Jobs werden derzeit in Niedersachsen (6 Jobs), Bayern (5 Jobs) und Baden-Württemberg (4 Jobs) angeboten.
