33 Jobs für Heat Transfer Engineer
Stellenangebote Heat Transfer Engineer Jobs
Job am 14.01.2026 bei Jooble gefunden
Polaris Raumflugzeuge GmbH
• Bremen
[. .. ] are working at two locations to make our vision reality. We are continuing to expand our team and are looking to fill the position of a Rocket [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Engine Thermal Analysis Engineer (m/f/d) . Your mission Perform thermal design and analysis of rocket engines at system, subsystem, and component level Setup 0d/1D simulations for steady state and transient conditions Determine thermal loads from the hot gas in the combustion chamber into the injector and the chamber wall Design and assess cooling concepts such as regenerative cooling, film cooling, and radiative heat transfer Analyze heat transfer in hot gas flows, combustion chambers, nozzles, and cooling structures Define thermal boundary conditions, load cases, and thermal margins Support engine design by identifying thermal risks and proposing optimization Correlate analytical results with test data and derive design updates Document models, assumptions, results, and design decisions Collaborate [. .. ]
Job am 14.01.2026 bei Jooble gefunden
Polaris Raumflugzeuge GmbH
Rocket Engine Flow Simulation Engineer (m/f/d)
• Bremen
We are continuing to expand our team and are looking to fill the position of a Rocket Engine Flow Simulation
Engineer (m/f/d) . Perform CFD simulations for liquid rocket engines [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] with a focus on hot gas flow and cooling channel analyses Support the design of combustion chambers, nozzles, and cooling structures through numerical analysis Couple CFD results with thermal and structural analyses Validate and calibrate CFD models using experimental [. .. ] data Degree in Space Engineering, Aerospace Engineering (M. Minimum of 2 years of full-time experience Strong background in CFD, particularly for compressible flow, supersonic flow, hot gas flow conjugated heat transfer, cryogenic flow, reactive flows in rocket engines Proficiency in both German and English The German aerospace start-up POLARIS Raumflugzeuge Gmb H is developing a revolutionary reusable space launch and hypersonic transport system that operates like an aircraft. Based on more than 30 years of German and European spaceplane research, the [. .. ]
Job vor 4 Tagen bei Mindmatch.ai gefunden
Lam Research Salzburg GmbH
• Salzburg
[. .. ] and deposition products. We drive innovation to ensure our cutting-edge solutions are helping to solve the biggest challenges in the semiconductor industry. The impact youll make As [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] a Mechanical Engineer at Lam, youre designing and defining cutting-edge mechanical and electro-mechanical systems. Your role involves feasibility studies, testing, and guiding teams in detailed design and fabrication. You provide the crucial design information needed to shape our technologys packaging. In this role, you will directly contribute to the design and [. .. ] Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD T) . Conduct detailed analysis including structural, finite element analysis (FEA) , thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs. Develop and conduct feasibility studies and test plans to characterize and validate design performance. Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews. Collaborate [. .. ]
Job vor 8 Tagen bei Mindmatch.ai gefunden
Liebherr Group
Development Engineer Cooling Technology (m/f/d)
• AT- 7 Lienz
Development
Engineer Cooling Technology (m/f/d) Join to apply for the Development Engineer Cooling Technology (m/f/d) role at Liebherr Group. To strengthen our team at our locations in Lienz or Marica, [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] we are looking for you as a Development Engineer Cooling Technology (m/f/d) . Your Responsibilities Interdisciplinary [. .. ] the design, optimization, and improvement of refrigeration functions with a focus on internal and external customer requirements Independent planning and execution of measurement series in the laboratory Active international knowledge transfer through clear documentation and proactive communication Crossdepartmental and crossplant cooperation in an international development environment Your Competences Successfully completed technical degree, ideally in mechanical engineering with a specialization in energy technology or refrigeration technology or completed vocational training with relevant further education Extensive knowledge of thermodynamics and heat engineering, acquired through several years of professional experience in product development Knowledge in the field of simulation (e. g. , flow, thermodynamics) is an advantage Advanced written and spoken English skills (B2.2) Strong communication skills and analytical problemsolving abilities Technical creativity, methodological competence, handson mentality Our Offer Interesting and [. .. ]
Job vor 8 Tagen bei Mindmatch.ai gefunden
Lam Research
• AT- 5 Salzburg
[. .. ] communities. Because at Lam, we believe that when people are the priority and theyre inspired to unleash the power of innovation for a better world together, anything [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] is possible. Mechatronics Engineer (all genders) Date: 15.10.2025 Location: Salzburg Req ID: 180636 191236 Worker Category: On-site Flex The group youll be a part of In the Global Products Group, we are dedicated to excellence in the design and engineering of Lams etch and deposition products. We drive innovation to ensure [. .. ] analysis, assembly, testing, integration, and volume manufacturing. Design and analyze mechanical and mechatronic systems, including motion control and automation. Conduct detailed analysis including structural, finite element analysis (FEA) , thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs. Work with crossfunctional teams (software, controls, suppliers, manufacturing) . Developing control systems in close collaboration with software teams. Conduct feasibility studies, prototype fabrication, and failure analysis using methods like 5Why and 8D, characterize and validate design performance. [. .. ]
Job am 17.01.2026 bei Mindmatch.ai gefunden
Lam Research Salzburg
Mechatronics Engineer (all genders)
• hallein
[. .. ] and deposition products. We drive innovation to ensure our cutting-edge solutions are helping to solve the biggest challenges in the semiconductor industry. The impact youll make As [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] a Mechatronics Engineer at Lam, youre designing, develop, modify and integrate automation and robotic solutions and develop new electro-mechanical concepts for new product lines. You are responsible for conceptualizing, designing, and assembling components, preparing test plans and supporting testing and validation of products and systems and enhancement of manufacturing, processing or production [. .. ] analysis, assembly, testing, integration, and volume manufacturing. Design and analyze mechanical and mechatronic systems, including motion control and automation. Conduct detailed analysis including structural, finite element analysis (FEA) , thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs. Work with cross-functional teams (software, controls, suppliers, manufacturing) . Developing control systems in close collaboration with software teams. Conduct feasibility studies, prototype fabrication, and failure analysis using methods like 5-Why and 8D, characterize and validate [. .. ]
Job vor 3 Tagen bei Jobleads gefunden
• Ottobrunn, Bayern
Absolventen, Einsteiger, Trainees
Jobticket
[. .. ] cooperation with other departments such as Propulsion Technology and Launch Vehicle teams is necessary since their requirements dictate the design of the ground support equipment. As a [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Junior Process Plant Engineer, you play a critical supporting role during the development and implementation phases of such facilities. Your Role in Our Space Mission Support the construction and project management as well as the entire engineering/ project team in day-to-day business and organizational matters Support in subcontractor management Travel to construction [. .. ] project documentation e. g. project schedules, Minutes of Meetings, Agendas, technical standards etc. Check 3D piping models, isometrics, BOMs/ MTOs, P IDs, technical manufacturing and assembly drawings Utilise knowledge of heat transfer, thermodynamics, fluid dynamics and mechanical engineering to tackle issues in facility design Potentially design smaller 3D piping models or small test facilities, regarding preliminary layout and/or detailed drawings Support in hardware procurement matters Independently coordinate, prepare and follow-up on appointments Qualification Checklist Bachelors or Masters degree in mechanical, [. .. ]
Job vor 9 Tagen bei Jobleads gefunden
Gas Turbine Exhaust System Engineer (R D) (f/m/d)
• Erlangen, Bayern
Sabbaticals
[. .. ] several years of relevant experience in powerplant business Knowledge of material properties in a hot gas environment, incl. welding, manufacturing processes and related codes and international standards [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] preferred Knowledge of heat transfer, noise absorption, hydraulic/ pneumatic control desirable Strong problemsolving and communication skills; able to handle complex engineering tasks and explain technical concepts clearly in an international environment Experience with CAd/FEM or similar tools preferred and familiarity with risk assessment methods, such as Failure Mode and Effects Analysis (FMEA) , and [. .. ]
Job vor 12 Tagen bei Jobleads gefunden
• Berlin
Overview What To Expect: As an Analysis
Engineer, you will play a critical role in the development of next generation Tesla products. You will be brilliant both technically and [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] as a person, and as an engaged member in a diverse and dynamic cross-functional team environment. You will work with Vehicle Engineering teams to understand the performance of [. .. ] pre-processors, solvers, and post-processors in a product development environment. ANSA, META, Abaqus, LS-DYNA Implicit, n Code preferred Understanding of theory in a range of mechanical engineering subjects, including heat transfer, vibrations, controls, and fluid dynamics Demonstrated ability to deliver work on complex projects with extremely tight timing constraints. Excellent attitude, organization skills, and self-motivation #J-18808-Ljbffr 78126161 [. .. ]
Job am 17.01.2026 bei Jobleads gefunden
Application Sales Engineer
• Glinde, Schleswig- Holstein
About The Job As a key member of Alfa Lavals team, you will provide technical and commercial support for our Contherm scraped surface
heat exchanger product line, which serves demanding [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] applications in food, personal care, and protein processing industries. This role ensures the successful delivery of capital equipment projects by supporting international sales teams, channel partners and customers with product selection, design, quotations, and demonstrations. Operating in a global environment, you will collaborate with [. .. ] commitment of approximately 4060 days per year, both within Europe and overseas. What You Know Bachelors degree in engineering (Chemical, Mechanical, or a closely related field) with background in heat transfer/ thermodynamics or similar highly desirable. Minimum five years of relevant industry experience. Working knowledge of heat exchangers, process equipment, rotating equipment or similar. Background in a B2B manufacturing environment, including both direct trading and channel/ partnerbased sales models. Experience from working in a sales support and/or marketing organization. Strong [. .. ]
Job am 15.01.2026 bei Jobleads gefunden
• Grünheide (Mark) , Brandenburg Grünheide (Mark)
[. .. ] of experience Intermediate knowledge of mechanical engineering principles and systems including pumps, pneumatics, fans, flow meters, air handling systems, industrial chilled water, heating, process piping, rotating equipment, [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] vibration analysis, and heat transfer is a benefit Strong troubleshooting background and issue resolution Strong data and system analysis Strong teamwork and communication skills Intermediate project management skills Very good German skills desired Proven ability to work in a large, complex environment where you must adapt to meet company needs Seniority level Entry level Employment [. .. ]
Job am 13.01.2026 bei Jobleads gefunden
Rocket Engine Thermal Analysis Engineer (m/f/d)
• Bremen
[. .. ] Aerospace Engineering (M. Sc. ) or similar Minimum of 2 years of full-time experience Strong background in thermal conditions inside of rocket engines Profound understanding of fluid [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] dynamics, thermodynamics, heat conduction, heat transfer and radiation Profound understanding of cooling channel design Proactive thinking, high level of motivation, flexibility, and team-working skills Proficiency in both German and English Join us in shaping the future of space transportation and making a positive impact. If your profile fits our requirements, apply now by sending your [. .. ] are working at two locations to make our vision reality. We are continuing to expand our team and are looking to fill the position of a Rocket Engine Thermal Analysis Engineer (m/f/d) . Your mission Perform thermal design and analysis of rocket engines at system, subsystem, and component level Setup 0d/1D simulations for steady state and transient conditions Determine thermal loads from the hot gas in the combustion chamber into the injector and the chamber wall Design and [. .. ]
Job am 12.01.2026 bei Jobleads gefunden
Mechatronics Engineer (all genders)
• Salzburg
[. .. ] communities. Because at Lam, we believe that when people are the priority and theyre inspired to unleash the power of innovation for a better world together, anything [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] is possible. Mechatronics Engineer (all genders) Date: 15.10.2025 Location: Salzburg Req ID: 180636 191236 Worker Category: On-site Flex The group youll be a part of In the Global Products Group, we are dedicated to excellence in the design and engineering of Lams etch and deposition products. We drive innovation to ensure [. .. ] analysis, assembly, testing, integration, and volume manufacturing. Design and analyze mechanical and mechatronic systems, including motion control and automation. Conduct detailed analysis including structural, finite element analysis (FEA) , thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs. Work with crossfunctional teams (software, controls, suppliers, manufacturing) . Developing control systems in close collaboration with software teams. Conduct feasibility studies, prototype fabrication, and failure analysis using methods like 5Why and 8D, characterize and validate design performance. [. .. ]
Job am 21.12.2025 bei Jobleads gefunden
Powertrain Transmission Technology Research Engineer
• München, Bayern
Powertrain Transmission Technology Research
Engineer Our Powertrain Transmission team develops e-axles, motors, and gearboxes for new-energy vehicles. Were committed to innovation and to delivering lightweight, highly efficient products with [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] outstanding NVH performance. We welcome candidates who are passionate about pushing the boundaries of powertrain transmission and eager to contribute to our pioneering work. [. .. ] Analysis Develop high-fidelity models of electric driveline power losses and conduct parametric studies to optimize design variables and drive continuous improvement. Conceptual design and modeling analysis of ultra-high heat transfer drive systems for motor and transmission. Research Project Management Forge and maintain strategic partnerships with leading technical institutes and regional suppliers for collaborative R D. Lead the end-to-end project lifecycle: planning, execution, monitoring, status reviews, risk mitigation, and on-site oversight. Track schedules, budgets, and deliverables to ensure [. .. ]
Job am 17.12.2025 bei Jobleads gefunden
[. .. ] to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands. As [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] a Propulsion Analysis Engineer II, you will primarily focus on structural analysis of vehicles and propulsion systems. You will be exposed to multiple vehicles, systems, and engines, along with the unique challenges each present. We are looking for analysts who bring new skills and best practices from their prior experience to Ursa and who, [. .. ] crack initiation predicted by a strainlife/ e N approach) Fracture analysis (crack growth/ safelife and assessing for instability via LEFM, ideally with prior experience using NASGRO) A strong theoretical background in heat transfer, fluid mechanics, and/or compressible flow Experience with the ANSYS FEA suite Experience with Femap/ Nastran Experience anchoring analytical models to physical testing Knowledge of turbomachineryrelated analytical methods (e. g. , generating Campbell diagrams to assess margins on rotordynamics or structural modes or rotating hardware) Prior professional experience working on [. .. ]
Job am 16.12.2025 bei Jobleads gefunden
Thermal Engineer (m/f/d)
• Weßling, Bayern
For our renowned customer in the aerospace industry we are looking for a Thermal
Engineer (m/f/d) in temporary employment as soon as possible. Your tasks: Support the thermal run-away [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] design of the battery modules using calculation methods ranging from 1st order principles, e. g. , Excel, to complex 3D CFD simulations Support the design process for the thermal management of the battery [. .. ] of professional experience in a similar position Experience working on battery pack design and simulation, including thermal run-away is beneficial Excellent skills in state of the art CFD and heat transfer modelling Experience with thermal networks and reduced-order modeling Experience with system modeling and mechanical design processes would be a plus Experience in working with Star CCM+ and Python or Matlab Experience in working with Amesim or Simscape would be a plus Very good knowledge of English We offer you: Permanent [. .. ]
Job am 12.12.2025 bei Jobleads gefunden
• Berlin
Associate Mechanical Design
Engineer, Battery Module, Battery Engineering (m/w/d) What To Expect Mechanical engineers on our engineering team dont just design batteries we ship them The role requires strong [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] fundamentals, a passion to push the boundaries of technology and the tenacity to ensure the success of your creations. Our product requirements push [. .. ] supply chain, etc. ) Close, active supplier relationships Travel to support production launch and ramp (supplier visits, onsite at Tesla factories, etc. ) What Youll Bring Strong Engineering fundamentals in heat transfer, fluids, mechanics, and electronics Desire to own a lot and work hard we have small teams and fast timelines Demonstrated ability to create products: CAD design to handon prototyping Experience with various manufacturing processes such as plastic injection molding, metal stamping, thermoforming, welding/ brazing, plating, heat treating, and bonding. Direct [. .. ]
Job am 09.12.2025 bei Jobleads gefunden
Senior Loads and Dynamics Analysis Engineer
[. .. ] motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands. As a Senior Loads [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] and Dynamics Analysis Engineer, you will primarily focus on load development across vehicles and propulsion systems. Your secondary focus will either be Global Finite Element Modeling or GN C. You will be exposed to multiple vehicles, systems, and engines, along with the unique challenges each present. We are looking for experienced analysts who bring [. .. ] Nastran Fracture analysis (crack growth/ safe-life and assessing for instability via LEFM, ideally with prior experience using NASGRO) Experience with the ANSYS FEA suite A strong theoretical background in heat transfer, fluid mechanics, and/or compressible flow Prior experience working on safety-critical systems in production environments Prior professional experience working on either rocketry or turbomachinery Experience supporting failure investigations and root-cause analysis A track record of working efficiently in fast-paced engineering environments A track record of effective oral [. .. ]
Job am 08.12.2025 bei Jobleads gefunden
• München, Bayern
[. .. ] in startup Lead manufacturing process ramp-up, troubleshooting, and root cause analysis Lead and own process FMEAs before, during, and after the startup phase Ensure good documentation, training, [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] and knowledge transfer Cross-Functional Collaboration: You collaborate closely with internal experts in R D, characterization/ quality, product design, and sorbent/ process development to ensure manufacturing process parameters lead to a guaranteed high-quality sorbent module product, and you support the development of new testing methods External partnerships technical leadership: You act as [. .. ] products Field Expertise: You have experience with continuous manufacturing lines including powder handling processes (HSE regulations and ATEX requirements) Methods: You are logic-driven, experienced with both process modeling approaches (heat and mass transfer, etc. ) as well as structured risk-identification and problem-solving tools (e. g. , process FMEA, 5 Whys, Fishbone) Working Style Ownership: You take initiative, are results-driven without missing important details, and are hands-on throughout the full development cyclefrom lab to high-level evaluations [. .. ]
Job am 05.12.2025 bei Jobleads gefunden
(Senior) Mechanical Design Engineer Medium Voltage (m/f/d)
• Freiburg im Breisgau, Baden- Württemberg
(Senior) Mechanical Design
Engineer Medium Voltage (m/f/d) Location: Tesla Engineering Germany, Freiburg What To Expect At Tesla Engineering Germany in Freiburg, were building the future of sustainable energy by [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] developing innovative power electronics for energy storage and vehicle charging systems. Join our team to collaborate across different engineering areas, solve meaningful challenges creatively and transfer concepts from initial design, through prototyping and testing into real-world solutions. This is an opportunity to own key projects, use modern tools, and work in state-of-the-art facilities to create technologies that shape how energy systems evolve. You get to work on advancing power electronics used for [. .. ] the acceleration of the worlds transition to sustainable energy. What Youll Do Design and model various mechanical components and assemblies using advanced materials and techniques, such as plastics, sheet metal, heat sinks, insulation systems, magnetic components, high voltage connectors, and more. Perform and optimize mechanical design analysis using various tools and methods, including thermal, CFD, structural, design for assembly. Solve and prevent electronics packaging issues related to electrical isolation, electromagnetic interference (EMI) and RF communications amongst others. Simulate and validate the [. .. ]
Job am 27.11.2025 bei Jobleads gefunden
Development Engineer Cooling Technology (m/f/d)
• Lienz, Tirol
Development
Engineer Cooling Technology (m/f/d) Join to apply for the Development Engineer Cooling Technology (m/f/d) role at Liebherr Group. To strengthen our team at our locations in Lienz or [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Marica, we are looking for you as a Development Engineer Cooling Technology (m/f/d) . Your Responsibilities Interdisciplinary [. .. ] the design, optimization, and improvement of refrigeration functions with a focus on internal and external customer requirements Independent planning and execution of measurement series in the laboratory Active international knowledge transfer through clear documentation and proactive communication Crossdepartmental and crossplant cooperation in an international development environment Your Competences Successfully completed technical degree, ideally in mechanical engineering with a specialization in energy technology or refrigeration technology or completed vocational training with relevant further education Extensive knowledge of thermodynamics and heat engineering, acquired through several years of professional experience in product development Knowledge in the field of simulation (e. g. , flow, thermodynamics) is an advantage Advanced written and spoken English skills (B2.2) Strong communication skills and analytical problemsolving abilities Technical creativity, methodological competence, handson mentality Our Offer Interesting and [. .. ]
Job am 23.11.2025 bei Jobleads gefunden
Simulation Engineer (f/m/d)
• Wolfratshausen, Bayern
[. .. ] providing an inclusive environment and recognize our diversity contributes to our success. Sustainability Social Commitment: We support social and sustainable projects and encourage employee involvement. Location: Wolfratshausen [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] Hybrid Work Simulation Engineer (f/m/d) Responsibilities Simulation and design of mechanical seals for gases and liquids Structural analyses and strength assessments of components using FEM, including dynamic and thermal simulations Development and maintenance of automated simulation workflows and development of calculation tools Interpretation and presentation of simulation results to support decision-making [. .. ] engineering/ process engineering/ physics/ technical mathematics, computational engineering or similar fields Solid foundational knowledge in the fields of engineering mechanics, structural mechanics, thermodynamics, machine elements and materials science, fluid mechanics, heat and mass transfer Knowledge of finite element analysis and the use of corresponding tools (e. g. Ansys, Abaqus) Experience in applying artificial intelligence methods, especially in relation to physical systems (e. g. surrogate models, data-driven simulation, reinforcement learning) Programming skills in Python, MATLAB, . NET, or similar Very good German skills (at least [. .. ]
Job am 03.11.2025 bei Jobleads gefunden
Process Development Engineer-Crystallization, Drying Powder Processing
• Leipzig, Sachsen
Process Development
Engineer-Crystallization, Drying Powder Processing About us Primogene is an innovative biotech company developing advanced bioprocesses for the production of functional ingredients. We support human health through all [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] stages of life and across industries including nutrition, pharma, and personal care. About the role We are seeking a highly motivated Process Development [. .. ] drying processes. Handson experience with carbohydratebased products, oligosaccharides, biopolymers, or biobased ingredients is a strong plus. Technical Skills Strong knowledge of drying and crystallization principles, phase behavior, thermodynamics, and mass/ heat transfer. Experience in defining and optimizing critical process parameters to achieve target product properties. Familiarity with powder engineering aspects such as particle size distribution, flowability, morphology, and moisture control. Experience with postprocessing operations (e. g. , agglomeration, coating, milling) and product stability enhancement. Competence in process design, scaleup, and technoeconomic evaluation [. .. ]
Job am 28.10.2025 bei Jobleads gefunden
EU ES R D Lab VRF R D Engineer (m/f/d)
• Eschborn, Hessen
[. .. ] across the industries. New technologies and innovative applications allow real value propositions for our customers. The Europe Eco Solutions R D Lab is looking to hire a [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] VRF R D Engineer to join its new organization, based in Eschborn. The VRF R D Engineer will be resposible for managing new product development projects, related to a residential/ commercial heat pump and its applications (VRF-Variable Refrigerant Flow System, its applications including, such as, DX AHU (Air Handing Unit) ) . New product development Verify new product development request with EU product planning team. Test the interoperability and confirming the integration with 3rd party devices and services. Evaluate a new [. .. ] field test site. Troubleshoot a new product in the issued jobsites in EU region. Competitors analysis Analyzing and comparing the new product and its sequence of operation with competitors. Technical Transfer to the sales/ field/service technician Identify the root cause and find resolution. Create the technical documents, related to the new products or line up for sales. Lab Facility Management/ Operation Management maintenance of the Air to Air Test facility Reporting of Test Facility investment and assets Academic background in [. .. ]
Job am 20.08.2025 bei Jobleads gefunden
Heat Recovery Steam Generator Engineer
• Altbach, Baden- Württemberg
Heat Recovery Steam Generator
Engineer HRSG Engineer Combined Cycle Power Plants We are hiring an experienced HRSG (Heat Recovery Steam Generator) Engineer to design, optimize, and maintain HRSG [...]
MEHR INFOS ZUM STELLENANGEBOT
[...] systems within combined cycle power plants. The role demands strong expertise in thermodynamics, heat transfer, and fluid mechanics, coupled with hands-on experience in combined cycle operations and performance optimization. Key Responsibilities: Develop thermal layouts and HRSG designs, conduct heat balance calculations, and size pumps, valves, piping, and other system components. Create and optimize heat and mass balance diagrams, predict plant performance, and develop performance [. .. ]
1 von 2Weiter » Weitere Suchergebnisse laden »
Häufig gestellte Fragen
Wieviel verdient man als Heat Transfer Engineer pro Jahr?
Als Heat Transfer Engineer verdient man zwischen EUR 55.000,- bis EUR 80.000,- im Jahr.
Wieviele offene Stellenangebote gibt es für Heat Transfer Engineer Jobs bei unserer Jobsuche?
Aktuell gibt es auf JobRobot 33 offene Stellenanzeigen für Heat Transfer Engineer Jobs.
Wieviele Unternehmen suchen nach Bewerbern für Heat Transfer Engineer Jobs?
Aktuell suchen 12 Unternehmen nach Bewerbern für Heat Transfer Engineer Jobs.
Welche Unternehmen suchen nach Bewerbern für Heat Transfer Engineer Stellenangebote?
Aktuell suchen zum Beispiel folgende Unternehmen nach Bewerbern für Heat Transfer Engineer Stellenangebote:
- Polaris Raumflugzeuge GmbH (2 Jobs)
- Lam Research (2 Jobs)
- Climeworks (2 Jobs)
- Lam Research Salzburg GmbH (1 Job)
- Liebherr Group (1 Job)
- Lam Research Salzburg (1 Job)
In welchen Bundesländern werden die meisten Heat Transfer Engineer Jobs angeboten?
Die meisten Stellenanzeigen für Heat Transfer Engineer Jobs werden derzeit in Bayern (12 Jobs), Baden-Württemberg (4 Jobs) und Berlin (3 Jobs) angeboten.
Zu welchem Berufsfeld gehören Heat Transfer Engineer Jobs?
Heat Transfer Engineer Jobs gehören zum Berufsfeld Technik & Ingenieurwesen.
